M30 Wood Board Bulge Sensor - Non-Corrosion-Resistant Type / Board Defect Detection / Wood Board Hollow Detection

Product Code

N2025-22

Product Application：

This product is used on equipment such as wood board processing production lines to detect“blistered board ”。

Installation Instructions：

Sensor itself has M30×1.5 Thread +2 Nut connection

Product name

M30 Wood Board Bulge Sensor - Non-Corrosion-Resistant

Probe model

DYA-70-03A

Product description

The wood panel bulge sensor uses the differing ultrasonic penetration capabilities of different wood panels to identify whether the measured wood panel has internal bulges, bubbles, splicing cracks, bonding defects, etc.

Can be used to detect: ecological boards, rice straw boards, particle boards,Multi-layer boards, OSB, MDF, finger-jointed boards, and other wood panels.

Product specifications

Working mode: through-beam; via 485 Bus-configurable transmitpower;

Detection range: 60～120mm; Ideal value: 90～110mm； LED Blue light: indicates that the wood panel is not being measured and is in the airstate;

LED Green light: indicates that a wood panel is detected and has no defects;

LED Red light: indicates that a wood panel is detected and has adefect;

Supply voltage: DC 18V～30V, ripple 1%PP ；

No-load current：＜80mA

Digital output:RS485 modbus Protocol

NPN Output load current: 3×100mA；

24V Power consumption: 24V×100mA=2.4W；

Response delay: 15ms approx.;

Turn-off delay: 15ms approx.;

Impedance: ≥4K Ω

Output Signal：3 switching output,NPN Output, normally open.