Model: M30
💬 Online 9:00-18:00 (Mon-Fri) · 📋 Reply within 24h
| General Parameters | |
|---|---|
| Measuring Range | 0.2～6m |
| Setting Range | 0.2～6m |
| Indicator Light | Green LED, analog output status indicator: steady on within range, flashes when out of range |
| Yellow LED, switching output indicator: steady on when conducting | |
| Electrical Characteristics | |
| Supply Voltage | 24VDC±10%, with reverse polarity protection |
| No-Load Current | ≤25mA |
| Start-Up Delay | ≤300ms |
| Output Characteristics | |
| Output Type | 4～20mA analog output (load ≤500R at 24VDC) |
| 0～10V analog output (load ≥1k) | |
| NPN switching output, normally open (voltage drop: ≤3.5V) | |
| PNP switching output, normally open | |
| Standard RS-485 output (Modbus RTU protocol) | |
| Rated Operating Current Ie | ≤100mA |
| Resolution | 0.001m |
| Measurement Accuracy | ±0.5%FS or ±0.03m (whichever is greater) |
| Repeatability Accuracy | 0.25%FS |
| Hysteresis | 3% of the set switching distance |
| Ambient Temperature | |
| Operating Temperature | -20～+60°C |
| Storage Temperature | -40～+85°C |
| Mechanical Specifications | |
| Output Connection | M12 8-pin connector |
| Cable Length | 2m by default (other lengths available on request) |
| Transducer Thread | M30*1.5 |
| Protection Rating (IP Rating) | IP67 |
| Weight | <250g (excluding cable) |
| Material | Housing: 304 stainless steel; Transducer: ABS |
| Compliance Standards | |
| Standard | GB/T 14048.10-2016 |
| GB/T 14048.19-2013 | |
Send us your working conditions — engineers reply with selection advice and pricing within 24 hours.
Online 9:00-18:00 (Mon-Fri)
