Model: M18
💬 Online 9:00-18:00 (Mon-Fri) · 📋 Reply within 24h
| General Parameters | |
|---|---|
| Dead Zone(Blind Zone) | 0~0.06m |
| Detection Range | 0.06~1m |
| Setting Range | 0.06~1m |
| Transducer Frequency | 200kHz |
| Indicator Lights | |
| Green LED | Power Indicator Light |
| Yellow LED | Switching/Analog Output Range Indicator Light |
| Electrical Characteristics | |
| Operating Voltage | 10V～30VDC, Reverse Polarity Protection |
| No-Load Current | ≤25mA |
| Startup Delay | ≤300ms |
| Output Characteristics | |
| Output Type | 4～20mA Analog Output (Load capacity varies with supply voltage: 10VDC load ≤250R; 28VDC load ≤500R) 0～10V Analog Output (Supply range for this output: 12V～30V, load ≥1k) NPN Switching Output, Normally Open (Voltage drop: ≤3.5V) PNP Switching Output, Normally Open (One of the above 4 options selectable) RS-485 (Modbus RTU Protocol) |
| Rated Operating Current Ie | ≤100mA |
| Resolution | 0.001m |
| Measurement Accuracy | ±0.5%FS or ±0.03m (whichever is greater) |
| Repeatability Accuracy | 0.25%FS |
| Hysteresis | 3% of the set switching distance |
| Ambient Temperature | |
| Operating Temperature | -20～+60℃ |
| Storage Temperature | -40～+85℃ |
| Mechanical Specifications | |
| Output Connection Method | M12 8-pin Connector |
| Output Cable Length | Default 2m (Other cable lengths require customization) |
| Transducer Thread | M18×1.0 |
| Protection Rating(IP Rating) | IP67 |
| Weight | <100g (excluding cable) |
| Material | Housing: Stainless Steel + High-Transparency PC |
| Compliance Standards | |
| Standards | GB/T 14048.10-2016 GB/T 14048.19-2013 |
Send us your working conditions — engineers reply with selection advice and pricing within 24 hours.
Online 9:00-18:00 (Mon-Fri)
