Products

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Road waterlogging sensor (split type) operates stably underwater for a long time. Measurement accuracy: ±0.5% (of maximum range), with precise and reliable data acquisition. Transducer IP68 protection, waterproof and dustproof, adapts to harsh environments. Transducer range: 2m in clean water, meeting the needs of water accumulation monitoring in urban roads, bridge tunnels and other scenarios. Widely used in flood-prone areas such as bridge tunnels, railways and urban roads. Real-time early warning of flood disasters, reducing the risk of urban waterlogging. Four working site photos: 1. Monitor water accumulation on factory roads and unloading areas; 2. Monitor water accumulation at parking lot entrances and low-lying areas; 3. Monitor water depth on low-lying road sections during heavy rain; 4. Monitor tunnel

The sound velocity and sound attenuation measuring instrument can measure by immersion in liquid, three parameters completed by one unit, sound velocity/sound attenuation/acoustic impedance. Material sound velocity, material sound attenuation, material acoustic impedance are measured together. Meets the needs of material research, mechanical research, and medical research.

Single/double sheet detection sensor (for labels), with intelligent linkage of transmitting and receiving dual probes, accurately identifies 2mm label gaps during high-speed movement at 50 meters/minute. Millisecond response, triple signal output, industrial-grade protection. Applications: online detection in label printing presses, positioning in automatic cutting machines, missing-label early warning in labeling machines, gap recognition in web slitting machines. Single/double sheet anti-overlap detection on label production lines, single/double sheet anti-overlap detection for solar silicon wafers, transparent film anti-double-layer detection on coating machines, and layer count identification and monitoring for stamped thin metal sheets.

1. All-weather detection: operates normally in -20℃ severe cold 2. Intelligent false-alarm prevention: freely configurable 0.3-3m detection range 3. Remote control: real-time data reading via 485 communication Real-time cattle position monitoring automatically triggers the spray/feeding systems, reducing manual misjudgment. - Cattle pen entrance counting zone - Automatic spray control zone - Feed intake behavior monitoring point - Cattle pen nighttime dynamic monitoring

Wood board bulge detection sensor is used for wooden panel defect inspection. It is not limited by the vibration, material, color, or transparency of the inspected object, overcoming the disadvantages of photoelectric, mechanical, and other similar products. Each sensor pair can measure independently without a master controller. The sensor identifies defects in wooden boards by detecting differences in ultrasonic penetration through the board. With an IP66 protection rating, it is rainproof (not suitable for immersion in liquid) and features strong electromagnetic interference immunity, filtering out approximately 60%–77% of EMI from both the power supply and the air.

The transducer test board is suitable for driving and receiving DAYU ultrasonic transducers from 15KHz ～300KHz. The board mainly consists of a power supply circuit, frequency generation circuit, driving circuit, and signal amplification circuit. By selecting the relevant jumper caps on the board, the center frequency and echo amplitude of the corresponding transducer can be conveniently tested. For design and development personnel who are new to ultrasonic transducers, using this board for testing can help better understand the basic principles of ultrasonic transducers.

Ultrasonic noise detection sensor for ambient noise detection, mainly used to detect the sound of shrimp feeding to control the feeding amount. Detectable frequencies: 1~20KHz, 1~40KHz, 1~60KHz; three options available.

M30 wood panel blister sensor - non-corrosion-resistant item Product Image Product No. N2025-22 Product application: This product is used in wood panel processing production lines and other equipment to detect "blistered boards". Installation: The sensor itself has M30×1.5 thread + 2 nuts for connection. Product name: M30 wood panel blister sensor - non-corrosion-resistant. Probe model: DYA-70-03A. Product description: The wood panel blister sensor uses the different ultrasonic penetration abilities of different wood panels to identify whether the tested wood panel has internal bulges, bubbles, splice cracks, bonding defects, etc. It can be used to detect: ecological board

Ultrasonic Tree Testing Sensor — non-destructive, with intuitive display and wide adaptability. It performs non-contact testing without damaging trees, quickly detecting defects such as holes, cracks, and loose structures. Used to identify structural issues inside trees, including voids, cracks, and other defects. By analyzing the received signals, the location, size, and severity of defects can be determined. Attached to the tree surface, the sensor detects issues through ultrasonic signal propagation. The testing process is safe and environmentally friendly — no chemical reagents or other hazardous substances are required, and it causes no environmental pollution.

Ultrasonic counting sensor. Introduction: A counting sensor using ultrasonic technology is mainly used for counting industrial products.

Ultrasonic deviation sensor, also called ultrasonic edge-guiding sensor. 1. Functional description: The ultrasonic deviation sensor is suitable for detecting any material, except materials that can transmit sound waves (such as loose textiles).