Ultrasonic sensor

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Suitable for various industrial measurement scenarios

Road waterlogging sensor (split type) operates stably underwater for a long time. Measurement accuracy: ±0.5% (of maximum range), with precise and reliable data acquisition. Transducer IP68 protection, waterproof and dustproof, adapts to harsh environments. Transducer range: 2m in clean water, meeting the needs of water accumulation monitoring in urban roads, bridge tunnels and other scenarios. Widely used in flood-prone areas such as bridge tunnels, railways and urban roads. Real-time early warning of flood disasters, reducing the risk of urban waterlogging. Four working site photos: 1. Monitor water accumulation on factory roads and unloading areas; 2. Monitor water accumulation at parking lot entrances and low-lying areas; 3. Monitor water depth on low-lying road sections during heavy rain; 4. Monitor tunnel

The ultrasonic dual-probe distance measurement sensor must be perpendicular to the water surface being measured, so that the signal is strongest during measurement. If the offset angle is ＞5°, it may not receive the signal reflected from the water surface. Standard RS485 output (Modbus-RTU protocol), supports 0～10V analog output, convenient for data acquisition and remote monitoring, improving management efficiency. It measures water level through air, so there is no wear on the sensor itself and it is not afraid of adhesion. Reduces maintenance workload and improves safety.

PCM60 ultrasonic Distance MeasurementSensor narrow-angle precise detection, wide coverage range, rugged dustproof and waterproof, 485 signal directly connects to control system. ±30mm industrial-grade measurement accuracy, universal for vehicles, ships, power grids, stable operation in severe cold and heat. 7° narrow beam avoids false reflection from walls, IP67 protection handles rain, snow and dust conditions. Smart trash bin material level monitoring, stereo garage vehicle positioning, underground well water level Monitoring, outdoor parking space detection.

Ultrasonic dual-channel Distance MeasurementSensor can measure 0.4 seconds after power-on/built-in power isolation/built-in signal isolation short-range measurement type: 100～300mm; long-range measurement type: 150～1500mm; two-target measurement, 485 output, 2-way switching output. Emission angle＜10°, filters power interference, non-contact measurement. Suitable for high-speed, high-viscosity, high-corrosion, sanitary measurement occasions, typical application scenarios high-speed, fragile, corrosion-resistant, small-space occasions. Centering detection, distance detection robot Obstacle AvoidanceCollision Avoidance detection, position detection

The sound velocity and sound attenuation measuring instrument can measure by immersion in liquid, three parameters completed by one unit, sound velocity/sound attenuation/acoustic impedance. Material sound velocity, material sound attenuation, material acoustic impedance are measured together. Meets the needs of material research, mechanical research, and medical research.

Single/double sheet detection sensor (for labels), with intelligent linkage of transmitting and receiving dual probes, accurately identifies 2mm label gaps during high-speed movement at 50 meters/minute. Millisecond response, triple signal output, industrial-grade protection. Applications: online detection in label printing presses, positioning in automatic cutting machines, missing-label early warning in labeling machines, gap recognition in web slitting machines. Single/double sheet anti-overlap detection on label production lines, single/double sheet anti-overlap detection for solar silicon wafers, transparent film anti-double-layer detection on coating machines, and layer count identification and monitoring for stamped thin metal sheets.

Applied to chemical raw material storage tanks, food-grade stainless steel tanks, pharmaceutical clean pipelines, and blood product process tanks. Covers detection from 5 cm small pipes to 1200 cm storage tanks. Applications: chemical storage tank liquid level monitoring, food and beverage tank liquid level monitoring, tanker truck liquid level monitoring, pharmaceutical reagent tank liquid level monitoring. TransducerFrequency: 1MHz, 2MHz Range: 0.05~1m Container diameter and wall thickness: 1-4mm Material penetration

1. All-weather detection: operates normally in -20℃ severe cold 2. Intelligent false-alarm prevention: freely configurable 0.3-3m detection range 3. Remote control: real-time data reading via 485 communication Real-time cattle position monitoring automatically triggers the spray/feeding systems, reducing manual misjudgment. - Cattle pen entrance counting zone - Automatic spray control zone - Feed intake behavior monitoring point - Cattle pen nighttime dynamic monitoring

M30 Ultrasonic Distance Measurement Sensor: stable operation under extreme temperature differences (saves temperature control equipment), narrow beam precise positioning (reduces environmental interference), IP66 protection rating (saves maintenance costs), millisecond response (improves production line efficiency), lightweight design (reduces installation costs), dual-color indicator light (saves troubleshooting time). Construction machinery: real-time safety distance management to avoid collision losses. Smart warehousing: precise management of three-dimensional storage locations, increasing turnover rate by 30%. Water conservancy monitoring: non-contact measurement to avoid effects of water quality contamination. Production line automation: 0.35-second fast response to ensure production takt time. Applications: robot obstacle avoidance/collision avoidance detection, position,...

M18 ultrasonic distance measurement sensor: stable operation under extreme temperature differences (eliminates temperature control equipment). Narrow beam for precise positioning (reduces environmental interference). IP66 protection rating (reduces maintenance costs). Millisecond-level response (improves production line efficiency). Lightweight design (reduces installation costs). Dual-color indicator light (saves troubleshooting time). Applications: liquid tank water level monitoring, robot collision avoidance detection, personnel presence detection in front of gantry cranes, train passage measurement at crossings. Applications: water level distance measurement in glass water tanks, liquid level distance measurement in small storage tanks, liquid level distance measurement in beakers, and bottled liquid level distance measurement on production lines.

Wood board bulge detection sensor is used for wooden panel defect inspection. It is not limited by the vibration, material, color, or transparency of the inspected object, overcoming the disadvantages of photoelectric, mechanical, and other similar products. Each sensor pair can measure independently without a master controller. The sensor identifies defects in wooden boards by detecting differences in ultrasonic penetration through the board. With an IP66 protection rating, it is rainproof (not suitable for immersion in liquid) and features strong electromagnetic interference immunity, filtering out approximately 60%–77% of EMI from both the power supply and the air.

The transducer test board is suitable for driving and receiving DAYU ultrasonic transducers from 15KHz ～300KHz. The board mainly consists of a power supply circuit, frequency generation circuit, driving circuit, and signal amplification circuit. By selecting the relevant jumper caps on the board, the center frequency and echo amplitude of the corresponding transducer can be conveniently tested. For design and development personnel who are new to ultrasonic transducers, using this board for testing can help better understand the basic principles of ultrasonic transducers.

Ultrasonic noise detection sensor for ambient noise detection, mainly used to detect the sound of shrimp feeding to control the feeding amount. Detectable frequencies: 1~20KHz, 1~40KHz, 1~60KHz; three options available.

M30 wood panel blister sensor - non-corrosion-resistant item Product Image Product No. N2025-22 Product application: This product is used in wood panel processing production lines and other equipment to detect "blistered boards". Installation: The sensor itself has M30×1.5 thread + 2 nuts for connection. Product name: M30 wood panel blister sensor - non-corrosion-resistant. Probe model: DYA-70-03A. Product description: The wood panel blister sensor uses the different ultrasonic penetration abilities of different wood panels to identify whether the tested wood panel has internal bulges, bubbles, splice cracks, bonding defects, etc. It can be used to detect: ecological board

PCM80 Ultrasonic Distance Measurement Sensor Flange mounting eliminates bracket resonance damage; RS485 + relay simultaneous output reduces system retrofit cost. The 250-3500mm span covers 12 types of application scenarios, eliminating the cost of procuring and managing multiple devices. Flange-secured design enables precise distance measurement in confined spaces. Applied to AGV obstacle avoidance systems, intelligent stereoscopic warehouses, crane positioning, and port hoisting.