Ensure Accurate Measurement! Sewer Flow Meter Installation Requirements Revealed! [Dayu Electronics]
In urban sewer environments, due to limited space, manual work is very inconvenient, making the installation of sewer flow meters a huge challenge for customers.
First, if the flow meter is to be installed inside a pipe, there is an important requirement: it must never be installed at the very bottom. Because the bottom often has silt deposits and silt brought by the water flow. This silt will interfere with the measurement, causing attenuation of the measurement signal or even data fluctuations.
Second, to ensure that the measurement data is close to the actual flow velocity, the water flow must cover at least 5 cm above the top of the sensor to achieve accurate measurement.
Another point to note: the sensor head must not face the pipe wall or the well wall. If the installation position is incorrect, the measurement data will have significant deviations.
For better installation of the sewer flow meter, it is recommended to make the bracket into an "L" shape and install the sensor inside the pipe. Also, avoid installing the sensor in vertical wells to prevent affecting measurement accuracy.
In summary, these are the installation requirements for sewer flow meters! I believe that through today's introduction, everyone has a clearer understanding of the installation requirements for sewer flow meters.
Remember, accurate installation of sewer flow meters is crucial for precise measurement and monitoring of sewer operations. Only accurate data can help us better understand the condition of the pipes and take appropriate maintenance and upkeep measures.