IP68 Ultrasonic Water Level Meter

       The low-power 6V-powered IP68 ultrasonic water level meter uses acoustic wave media to perform non-contact and wear-free detection of the target object.

Ultrasonic water level meter is mainly used to detect sewage, river water, and clean water, and can measure the distance from the sensor emitting surface to the water surface.

      The Dayu Electronics IP68 ultrasonic water level meter has an IP68 protection rating and can be submerged at depths up to 100 meters for long periods without damage. (Note: The cable outlet of the instrument must be properly sealed after field wiring to prevent water ingress.)

Measurement Range: 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m;

Measurement Output: Distance value from the emitting surface to the measured water surface;

Sensor Thread: Varies depending on the measurement range;

Blind Zone: Varies depending on the measurement range;

Supply Voltage: DC 6V to 9V,

Output: 1x RS485 MODBUS protocol;

Display: No display

Cable Length Included: 1m

Cable Outlet: 4-core

Operating Ambient Temperature: -20 to +60°C;

Operating Ambient Pressure: 1 standard atmosphere;

Operating Ambient Humidity: ≤90% RH, non-condensing;

Power-On Acquisition Delay: Data acquisition starts 3.0 seconds after power-on, and finishes 3.0 seconds later.

IP68 Ultrasonic Water Level Meter Manual Download Link: /zh/ziliaoxiazai/332.html

Low-Power Integrated Ultrasonic Water Level Meter Manual Download Link: /zh/ziliaoxiazai/331.html